激光等离子体脉冲软X光标定源

 利用神光Ⅱ上激光与等离子体相互作用得到的软X光，建立了基于多层镜的四通道软X光单色器系统。研究了光源的性能，测量了光源强度、单色器系统稳定性、相应通道的一致性。研究表明，采用多层镜作为脉冲光源的分光元件，可以得到具有较好单色性的强脉冲软X 光标定源。光源的光子能量为253 eV和820 eV，两能道的光源强度分别为1.8×10¹⁹ photon/(s·cm²)和3.2×10¹⁹ photon/(s·cm²)。在该标定源上可以实现XRD、平面镜、多层镜、透射光栅和滤片的标定。     

光束旋转90°多程放大系统的波前误差校正

光束通过神光-Ⅲ原型装置四程放大系统发生了90°旋转和扩束。在四程放大系统腔镜处放置变形镜校正系统像差是一种新的自适应光学方案，推导出被校正像差与变形镜面形之间的数学关系。理论推导表明，在扩束比大于1的前提下，腔镜处变形镜可以校正系统输出的任意类型的像差，且变形镜对应的面形唯一。理论分析和计算仿真说明该方案的校正能力与像差类型和扩束比有关，扩束比增大将增强变形镜校正像散的能力，但系统旋光消像散的能力也将减弱。     

Total analysis of surface structure and properties by UHV transfer system

We have developed an ultrahigh-vacuum (UHV) complex sample preparation and analysis system, which realizes a reliable surface science analyzing various characters on an identical surface. The system contains three sample-preparation-and-characterization chambers and five analysis chambers. They are (1) an electronic-properties-characterization chamber, (2) a magnetic-properties-characterization chamber, (3) an organic-molecule chamber, (4) UHV SEM, (5) a high-energy-resolution angle-resolved photoelectron spectrometer, (6) a high-energy-resolution display-type spherical mirror analyzer, (7) a room-temperature (RT) STM, and (8) an optical-properties characterization chamber. A special sample holder is used with six electrodes on it, which enables accurate temperature measurement of a sample by connecting a thermocouple directly to the sample even if it is transferred. Four other electrodes can be used for construction of various circuits including evaporators. Some examples are shown.     

Development of a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA), and its application to Auger photoelectron coincidence spectroscopy (APECS)

We have developed a miniature double-pass cylindrical mirror electron energy analyzer (DPCMA) with an outer diameter of 26 mm. The DPCMA consists of a shield for the electric field, inner and outer cylinders, two pinholes with a diameter of 2.0 mm, and an electron multiplier. By assembling the DPCMA in a coaxially symmetric mirror electron energy analyzer (ASMA) coaxially and confocally we developed an analyzer for Auger photoelectron coincidence spectroscopy (APECS). The performance was estimated by measuring the Si-LVV-Auger Si-1s-photoelectron coincidence spectra of clean Si(1 1 1). The electron-energy resolution of the DPCMA was estimated to be E/ΔE = 20. This value is better than that of the miniature single-pass CMA (E/ΔE = 12) that was used in the previous APECS analyzer.     

Propagation properties of beams generated by Gaussian mirror resonator in uniaxial crystals

Based on the paraxial vectorial theory of beams propagating in uniaxially anisotropic media, we have derived the analytical propagation equations of beams generated by Gaussian mirror resonator (GMR) in uniaxial crystals, and given the typical numerical example to illustrate our analytical results. Due to the anisotropy crystals, the ordinary and extraordinary beams originated by incident beams generated by GMR propagate with different diffraction lengths, thus the linear polarization state and axial symmetry of the incident beams generated by GMR do not remain during propagating in crystals.     

K9和石英玻璃基片上Au膜真空紫外反射特性研究

采用离子束溅射法,分别在经过不同前期清洗方法处理过的K9及石英玻璃光学基片上,选择不同的镀膜参量,镀制了多种厚度的Au膜。对镀制的Au膜在真空紫外波段较宽波长范围内的反射率进行了连续测量。测试结果表明:辅助离子源的使用方式、Au膜厚度对反射镜的反射率有重大影响。基片材料、镀前基片表面清洗工艺等对反射率也有一定影响。采用镀前离子轰击,可显著提高Au膜反射率及膜与基底的粘合力;获得最高反射率时的最佳膜厚与基片材料、镀膜工艺密切相关。对经过离子清洗的石英基片,膜厚在30 nm左右反射率最高;比较而言,石英基片可获得更高的反射率;辅助离子源的使用还显著影响获得最高反射率时对应的最佳膜厚值,且对K9基片的影响更显著。     

平面反射镜表面散射光干涉

激光束照射到表面被粘污的反射镜上会产生干涉环,入射光束和反射光束在被粘污表面产生散射光干涉.随着入射角的变化,光束在反射镜玻璃片内光程改变,引起干涉环从中心冒出或缩进,干涉环级数的变化与入射角的平方成正比.     

HER磁镜装置中Hα测量及结果

本文描述HER磁镜中Ha面发光度时空分布的测量,发现等离子体发光,扰动,工作模式等呈环状结构;一个良好的热电子环可以抑制扰动环区的低频扰动。     

Circularly Polarized RF Magnetic Fields for Spin-1 NQR

The low sensitivity of nuclear quadrupole resonance (NQR) of powders is due, in part, to the inability to efficiently excite and detect nuclei at all crystal orientations. Here we describe the use of circularly polarized RF magnetic fields for excitation followed by detection of the resultant circular RF magnetization in I=1 NQR to increase the fraction of nuclei excited and detected. We show that the technique can greatly improve the effective RF field homogeneity and increase the largest signal amplitude by a factor of 1.72. In favorable cases, the resulting circularly polarized NQR signal can be separated from linearly polarized magnetoacoustic and piezoelectric ringing artifacts that occur in some NQR materials detection applications.     

刀口定量检验技术的研究

主要介绍了天文镜面加工的中的刀口定量检验技术，包括阴影图像ＣＣＤ实时采集，图像处理，定量计算。